1. The ice maker should be installed away from heat sources, without direct sunlight, and in a well-ventilated place. The ambient temperature should not exceed 35 degrees Celsius to prevent the ambient temperature from being too high, resulting in poor heat dissipation of the condenser and affecting the ice-making effect. The ground where the ice maker is installed should be solid and flat, and the ice maker must be kept level, otherwise it will not be able to remove ice and make noise during operation.
2. The gap between the back and left and right sides of the ice maker should be no less than 30cm, and the top gap should be no less than 60cm.
3. The ice maker should use an independent power supply, a dedicated power supply line, and be equipped with a fuse and a leakage protection switch, and it must be reliably grounded.
4. The water used by the ice maker must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipes and contaminating the sink and ice mold. And affect the ice-making performance.
5. Be careful when carrying the ice maker to prevent severe vibration. The carrying slope should not be less than 45 degrees. After long-distance transportation, the ice maker should be placed
LVNi produces various styles of ice maker Factory direct sales. Welcome to consult.