1. Water automatically enters a water storage tank through the water inlet valve, and then is pumped to the diverter pipe by the water pump. The diverter pipe evenly flows the water to the evaporator cooled by the low-temperature liquid refrigerant.
2. The water is cooled to the freezing point, and the water cooled to the freezing point will solidify into ice, while the water that is not frozen by the evaporator flows into the water storage tank again and starts circulating again through the water pump.
3. When the ice reaches the required thickness, it enters the de-icing state, and the high-pressure hot air discharged from the compressor is diverted to the evaporator through the reversing valve to replace the low-temperature liquid refrigerant.
4. In this way, a layer of water film is formed between the ice and the evaporator. This layer of water film makes the ice separate from the evaporator, and the ice falls freely into the ice storage tank below by gravity.
LVNi produces various styles of ice machines. Factory direct sales. Welcome to consult.